AFIM fasteners

Hex head screws

  • Hexagon head screws with partially threaded shank EN ISO 4014 ★ UNI 5737 DIN 931
  • Hexagon head screws with partially threaded shank EN ISO 4014
  • Hex head screws with fully threaded shank EN ISO 4017 ★ UNI 5739 DIN 933
  • Hexagon head screws with American thread UNF ANSI B 18.2.

Cylindrical head screws with hexagon socket

  • Cylindrical head screws with hexagon socket EN ISO 4762 UNI 5931 DIN 912
  • Cylindrical head screws with hexagon socket with ground shank and tang
  • Round head screws with hexagon socket EN ISO 7380

Headless screws (grains)

  • Hexagon socket grains, flat end EN ISO 4026 ★ UNI 5923 DIN 913
  • Hexagon socket with cylindrical end EN ISO 4028 ★ UNI 5925 DIN 915
  • Grains with hexagon socket and conical end EN ISO 4027 ★ UNI 5927 DIN 914

Hex nuts

  • Medium hexagon nuts type 1 – fine pitch EN ISO 8673
  • Self-locking low hex nuts with polyamide ring UNI 7474 DIN 985
  • Self-locking hexagon nuts – for high temperatures DIN 980
  • Flanged hex nuts EN ISO 4161 DIN 6923
  • Blind hex nuts with spherical cap UNI 5721 DIN 1587 ★
  • Slotted hex nuts UNI 5593 DIN 935
  • UNI 5594 slotted hex nuts
  • Elastic safety locknuts PAL DIN 7967
  • DIN 929 weld-on hexagon nuts
  • Square caged nuts
  • Lock nuts type KM DIN 981
  • Normal type lock nuts – nylon insert

Bolts for agricultural machines

Screws for metal

  • “Poelier” metal bolts with half round head with double slot NFE 25129 + DIN 555
  • Cylindrical head metal screws with screwdriver cut EN ISO 1207 UNI 6107 DIN 84
  • Flat countersunk head metal screws with screwdriver cut EN ISO 2009 UNI 6109 DIN 963
  • Metal screws with countersunk head with cap and screwdriver cut EN ISO 2010 DIN 964
  • Cylindrical head metal screws with cap and Phillips recess EN ISO 7045 ★ UNI 7687 ★ DIN 7985 ★
  • Flat countersunk head metal screws with Phillips EN ISO 7046 UNI 7688 DIN 965

Studs

  • Short root studs UNI 5909 DIN 938
  • UNI 5911 medium root studs
  • Studs with medium root – fine pitch UNI 5912
  • UNI 5914 DIN 835 long root studs

Threaded rod – Pull screws

  • Threaded rod length 1 meter DIN 975
  • Pull screws ANSI ANSI B 16.5

Self-tapping screws

  • Self-tapping cylindrical head screws with screwdriver cut EN ISO 1481 UNI 6951 DIN 7971
  • Self-tapping screws with flat countersunk head with screwdriver cut EN ISO 1482 UNI 6952 DIN 7972
  • Self-tapping screws with flat countersunk head with cap and screwdriver cut EN ISO 1483 UNI 6953 DIN 7973
  • Round head self-tapping screws with Phillips EN ISO 7049 UNI 6954 DIN 7981
  • Self-tapping flat countersunk head screws with Phillips head EN ISO 7050 UNI 6955 DIN 7982
  • Self-tapping flat countersunk head screws with cap and Phillips recess EN ISO 7051 UNI 6956 DIN 7983
  • Self-tapping sheet metal screws with hexagonal head EN ISO 1479 UNI 6949 DIN 7976
  • Hex head self-tapping sheet metal screws with edge UNI 6950

Self-forming-self-drilling screws for sheet metal

  • Three-lobed self-forming sheet metal screws with Pozidrive recess DIN 7500C
  • Three-lobed self-forming sheet metal screws with Pozidrive recess DIN 7500M
  • Self-tapping sheet metal screws with Phillips head UNI 8118 DIN 7504N
  • Hex head self-drilling sheet metal screws with edge UNI 8117 ★ DIN 7504K

Reinforced Grower spring washers rectangular section with sharp edges

  • Square section Grower spring washers for cylindrical head screws UNI 1751 A DIN 127B
  • DIN 7980 reinforced square section Grower spring washers

Superelastic discs for screws and bolts DIN 6796

Conical pins with threaded hole UNI 7284 DIN 7978

  • Interlocking tangs UNI 6604 A DIN 6885 A
  • Disc tongues UNI 6606 DIN 6888
  • Cotter pins EN ISO 1234 UNI 1336 DIN 94

Threaded inserts with cylindrical head FTT

Eyebolts, crickets, thimbles, tensioners, canaule

  • Circular eyebolts male EN ISO 3266 ★ DIN 580

Di seguito trovate gli articoli che AFIM potrebbe fornire su richiesta, essendo a contatto con i maggiori produttori mondiali.